No products were found matching your selection.
Other Related Products
-


- Width: 5 mm, 6 mm, 8 mm, 10 mm, 12 mm
- Color: clear, translucent, white, black, or blue thermal grade
- Carrier: PET film, thin foam, or thermal adhesive carrier
- Thickness: 0.05-0.2 mm PET grade, 0.3-0.8 mm foam or thermal grade
- Adhesive: heat-resistant acrylic PSA for LED strip lights
- Format: narrow slit rolls for back adhesive replacement
-


- Common size: 0.5 mm-6 mm thickness, slit rolls or die-cut pads
- Color: Black, white, grey, or project-based color
- Foam material: PE, EVA, PU, or medium/high-density foam
- Adhesive: Single sided or double sided pressure-sensitive adhesive
- Liner: PET film, glassine paper, or PE-coated release liner
- Use: Equipment panels, enclosures, anti-rattle points, transport cushioning
-


- Material: Closed-cell EVA foam carrier
- Adhesive: Acrylic, rubber, or hot melt PSA on both sides
- Thickness: Commonly 0.5mm-12mm
- Color: White, black, grey, or custom color
- Liner: Paper, PE-coated paper, or PET film release liner
- Format: Jumbo roll, slit roll, sheet, kiss-cut, or die-cut part
-


- Common size: 5 mm-1240 mm slit width, 25 m-100 m roll length
- Color: Clear, white, black, or natural PE carrier options
- Carrier: Polyethylene film carrier or polyethylene foam carrier
- Adhesive: Acrylic, rubber, or synthetic rubber PSA on both sides
- Thickness: Film type from 0.08 mm; foam type from 0.5 mm-3.0 mm
- Use: Lightweight mounting, panel bonding, slitting, die-cutting, converting
-


- – Common size: 1020 mm / 1050 mm / 1240 mm width, 100 m-300 m length
- – Thickness: 0.5 mm-3.0 mm typical range
- – Foam color: White, black, gray
- – Carrier: Closed-cell PE foam or EVA foam
- – Adhesive: Acrylic PSA or modified acrylic PSA
- – Use surface: Sealed wood, painted metal, PVC, ABS, PC, composite panels
-


- Width: 1020mm / 1240mm usable coating width
- Length: 1000m / 3000m roll length options
- Adhesive: hot melt, water-based acrylic, solvent acrylic
- Carrier: PET film, tissue, foam, cloth, transfer adhesive
- Liner: glassine paper, kraft paper, PET/PE/PP film
- Control points: +/-0.5mm slitting tolerance and clean roll edge
-


- Material:Closed-cell EPDM rubber foam for compression sealing
- Color:Black, with custom color options by request
- Thickness:Typical 1 mm-25 mm, selected by real gap size
- Density:Typical 80-180 kg/m3 for soft to medium sealing pressure
- Adhesive:Single-sided acrylic PSA, rubber PSA, or non-adhesive format
- Converting:Slit rolls, strips, kiss-cut parts, or die-cut pads
-


- Width: 90 mm, 100 mm, 150 mm
- Length: 20 m, 25 m, 50 m, 100 m
- Carrier: Kraft paper or release paper
- Reinforcement: Fiberglass yarn and scrim
- Glue Layout: 9-line or 11-line
- Color: Brown, white, gold, or custom
-


- Common widths: 1/4 in, 7/16 in, 1/2 in, custom narrow slitting
- Common thickness: 0.020 in and 0.040 in for shower seal bonding
- Color: Transparent, low-visibility bond line on glass
- Material: Clear acrylic high-bond pressure-sensitive adhesive
- Liner: Blue film liner or release paper options
- Use focus: Shower wipes, clear seals, and glass hardware assembly