No products were found matching your selection.
Other Related Products
-
- Material: Solid CR neoprene rubber with dense structure
- Color: Black standard, other colors by project request
- Hardness: 40, 50, 60, 70, 80 Shore A, typical tolerance +/-5
- Thickness: 0.5 mm-30 mm, with strip tolerance control
- Format: Rolls, sheets, slit strips, cut lengths, die-cut parts
- Options: Plain, PSA-backed, single-side adhesive, linered strips
-
- Common widths: 1/4 in, 7/16 in, 1/2 in, custom narrow slitting
- Common thickness: 0.020 in and 0.040 in for shower seal bonding
- Color: Transparent, low-visibility bond line on glass
- Material: Clear acrylic high-bond pressure-sensitive adhesive
- Liner: Blue film liner or release paper options
- Use focus: Shower wipes, clear seals, and glass hardware assembly
-
- Common size: 0.5 mm-6 mm thickness, slit rolls or die-cut pads
- Color: Black, white, grey, or project-based color
- Foam material: PE, EVA, PU, or medium/high-density foam
- Adhesive: Single sided or double sided pressure-sensitive adhesive
- Liner: PET film, glassine paper, or PE-coated release liner
- Use: Equipment panels, enclosures, anti-rattle points, transport cushioning
-
- Common thickness: 0.5 mm, 0.8 mm, 1.0 mm, 1.5 mm, 2.0 mm, 3.0 mm
- Color options: Black, white, gray, or custom color
- Foam carrier: PU foam with double coated PSA
- Adhesive options: Acrylic PSA or rubber PSA
- Supply format: Master roll, slit roll, sheet, kiss-cut, die-cut part
- Main use: Roll converting, assembly bonding, cushioning, gap filling
-
- Width: 90 mm, 100 mm, 150 mm
- Length: 20 m, 25 m, 50 m, 100 m
- Carrier: Kraft paper or release paper
- Reinforcement: Fiberglass yarn and scrim
- Glue Layout: 9-line or 11-line
- Color: Brown, white, gold, or custom
-
- Common Size: 30mm x 3m, 50mm x 5m, custom slit width
- Color: Clear transparent gel
- Material: PU gel or acrylic gel with PET release liner
- Adhesive Type: Removable pressure-sensitive gel adhesive
- Best Surfaces: Glass, ceramic tile, metal, acrylic, sealed plastic
- Reuse Method: Rinse with clean water and air dry fully
-
- Material: PVC/NBR closed-cell foam
- Color: Black, custom available
- Thickness: 1 mm – 25 mm typical
- Width: Slit rolls or custom strips
- Adhesive: Acrylic, rubber, high-tack options
- Format: Rolls, pads, gaskets, sheets
-
- Thickness: 1 mm to 12 mm typical
- Width: 5 mm to 100 mm slit rolls
- Material: foam, rubber, EPDM, neoprene, silicone options
- Adhesive: single-sided adhesive backing
- Liner: paper or film release liner
- Format: rolls, cut strips, adhesive backed gasket strips
