No products were found matching your selection.
Other Related Products
-
- Width: 1020mm / 1240mm usable coating width
- Length: 1000m / 3000m roll length options
- Adhesive: hot melt, water-based acrylic, solvent acrylic
- Carrier: PET film, tissue, foam, cloth, transfer adhesive
- Liner: glassine paper, kraft paper, PET/PE/PP film
- Control points: +/-0.5mm slitting tolerance and clean roll edge
-
- Material: Silicone sponge or silicone rubber
- Color: Black, grey, red, or custom
- Width: 10 mm to 100 mm
- Thickness: 2 mm to 15 mm
- Length: Roll or cut length
- Backing: Self adhesive liner
-
- Material: Closed-cell EVA foam carrier
- Adhesive: Acrylic, rubber, or hot melt PSA on both sides
- Thickness: Commonly 0.5mm-12mm
- Color: White, black, grey, or custom color
- Liner: Paper, PE-coated paper, or PET film release liner
- Format: Jumbo roll, slit roll, sheet, kiss-cut, or die-cut part
-
- Material: Solid CR neoprene rubber with dense structure
- Color: Black standard, other colors by project request
- Hardness: 40, 50, 60, 70, 80 Shore A, typical tolerance +/-5
- Thickness: 0.5 mm-30 mm, with strip tolerance control
- Format: Rolls, sheets, slit strips, cut lengths, die-cut parts
- Options: Plain, PSA-backed, single-side adhesive, linered strips
-
- Width Options: 10mm, 15mm, 20mm
- Roll Lengths: 5m, 10m, 50m
- Color: Transparent
- Material: Acrylic adhesive on PET film
- Liner: Removable silicone-coated paper
- Thickness: 0.12 – 0.18 mm
-
- Thickness: 1 mm to 12 mm typical
- Width: 5 mm to 100 mm slit rolls
- Material: foam, rubber, EPDM, neoprene, silicone options
- Adhesive: single-sided adhesive backing
- Liner: paper or film release liner
- Format: rolls, cut strips, adhesive backed gasket strips
-
- – Common size: 1020 mm / 1050 mm / 1240 mm width, 100 m-300 m length
- – Thickness: 0.5 mm-3.0 mm typical range
- – Foam color: White, black, gray
- – Carrier: Closed-cell PE foam or EVA foam
- – Adhesive: Acrylic PSA or modified acrylic PSA
- – Use surface: Sealed wood, painted metal, PVC, ABS, PC, composite panels
-
- Material:Closed-cell EPDM rubber foam for compression sealing
- Color:Black, with custom color options by request
- Thickness:Typical 1 mm-25 mm, selected by real gap size
- Density:Typical 80-180 kg/m3 for soft to medium sealing pressure
- Adhesive:Single-sided acrylic PSA, rubber PSA, or non-adhesive format
- Converting:Slit rolls, strips, kiss-cut parts, or die-cut pads
