No products were found matching your selection.
Other Related Products
-


- Material:Closed-cell EPDM rubber foam for compression sealing
- Color:Black, with custom color options by request
- Thickness:Typical 1 mm-25 mm, selected by real gap size
- Density:Typical 80-180 kg/m3 for soft to medium sealing pressure
- Adhesive:Single-sided acrylic PSA, rubber PSA, or non-adhesive format
- Converting:Slit rolls, strips, kiss-cut parts, or die-cut pads
-


- Material: Closed-cell EVA foam carrier
- Adhesive: Acrylic, rubber, or hot melt PSA on both sides
- Thickness: Commonly 0.5mm-12mm
- Color: White, black, grey, or custom color
- Liner: Paper, PE-coated paper, or PET film release liner
- Format: Jumbo roll, slit roll, sheet, kiss-cut, or die-cut part
-


- Width: 1020mm / 1240mm usable coating width
- Length: 1000m / 3000m roll length options
- Adhesive: hot melt, water-based acrylic, solvent acrylic
- Carrier: PET film, tissue, foam, cloth, transfer adhesive
- Liner: glassine paper, kraft paper, PET/PE/PP film
- Control points: +/-0.5mm slitting tolerance and clean roll edge
-


- Material: Silicone sponge or silicone rubber
- Color: Black, grey, red, or custom
- Width: 10 mm to 100 mm
- Thickness: 2 mm to 15 mm
- Length: Roll or cut length
- Backing: Self adhesive liner
-


- Common thickness: 0.5 mm, 0.8 mm, 1.0 mm, 1.5 mm, 2.0 mm, 3.0 mm
- Color options: Black, white, gray, or custom color
- Foam carrier: PU foam with double coated PSA
- Adhesive options: Acrylic PSA or rubber PSA
- Supply format: Master roll, slit roll, sheet, kiss-cut, die-cut part
- Main use: Roll converting, assembly bonding, cushioning, gap filling
-


- Width: 90 mm, 100 mm, 150 mm
- Length: 20 m, 25 m, 50 m, 100 m
- Carrier: Kraft paper or release paper
- Reinforcement: Fiberglass yarn and scrim
- Glue Layout: 9-line or 11-line
- Color: Brown, white, gold, or custom
-


- Common Size: 30mm x 3m, 50mm x 5m, custom slit width
- Color: Clear transparent gel
- Material: PU gel or acrylic gel with PET release liner
- Adhesive Type: Removable pressure-sensitive gel adhesive
- Best Surfaces: Glass, ceramic tile, metal, acrylic, sealed plastic
- Reuse Method: Rinse with clean water and air dry fully
-


- Common size: 0.5 mm-6 mm thickness, slit rolls or die-cut pads
- Color: Black, white, grey, or project-based color
- Foam material: PE, EVA, PU, or medium/high-density foam
- Adhesive: Single sided or double sided pressure-sensitive adhesive
- Liner: PET film, glassine paper, or PE-coated release liner
- Use: Equipment panels, enclosures, anti-rattle points, transport cushioning
-


- Thickness: 1 mm to 12 mm typical
- Width: 5 mm to 100 mm slit rolls
- Material: foam, rubber, EPDM, neoprene, silicone options
- Adhesive: single-sided adhesive backing
- Liner: paper or film release liner
- Format: rolls, cut strips, adhesive backed gasket strips