No products were found matching your selection.

Other Related Products

  • Shock Absorbing Foam Tape

    • Common size: 0.5 mm-6 mm thickness, slit rolls or die-cut pads
    • Color: Black, white, grey, or project-based color
    • Foam material: PE, EVA, PU, or medium/high-density foam
    • Adhesive: Single sided or double sided pressure-sensitive adhesive
    • Liner: PET film, glassine paper, or PE-coated release liner
    • Use: Equipment panels, enclosures, anti-rattle points, transport cushioning
    Read moreDone

  • Adhesive Backed Gasket Tape

    • Thickness: 1 mm to 12 mm typical
    • Width: 5 mm to 100 mm slit rolls
    • Material: foam, rubber, EPDM, neoprene, silicone options
    • Adhesive: single-sided adhesive backing
    • Liner: paper or film release liner
    • Format: rolls, cut strips, adhesive backed gasket strips
    Read moreDone

  • Vinyl Nitrile Foam Tape

    • Material: PVC/NBR closed-cell foam
    • Color: Black, custom available
    • Thickness: 1 mm – 25 mm typical
    • Width: Slit rolls or custom strips
    • Adhesive: Acrylic, rubber, high-tack options
    • Format: Rolls, pads, gaskets, sheets
    Read moreDone

  • Hot Melt Carpet Seaming Tape

    • Width: 90 mm, 100 mm, 150 mm
    • Length: 20 m, 25 m, 50 m, 100 m
    • Carrier: Kraft paper or release paper
    • Reinforcement: Fiberglass yarn and scrim
    • Glue Layout: 9-line or 11-line
    • Color: Brown, white, gold, or custom
    Read moreDone

  • LED Strip Mounting Tape

    • Width: 5 mm, 6 mm, 8 mm, 10 mm, 12 mm
    • Color: clear, translucent, white, black, or blue thermal grade
    • Carrier: PET film, thin foam, or thermal adhesive carrier
    • Thickness: 0.05-0.2 mm PET grade, 0.3-0.8 mm foam or thermal grade
    • Adhesive: heat-resistant acrylic PSA for LED strip lights
    • Format: narrow slit rolls for back adhesive replacement
    Read moreDone

  • Double Sided Polyethylene Tape

    • Common size: 5 mm-1240 mm slit width, 25 m-100 m roll length
    • Color: Clear, white, black, or natural PE carrier options
    • Carrier: Polyethylene film carrier or polyethylene foam carrier
    • Adhesive: Acrylic, rubber, or synthetic rubber PSA on both sides
    • Thickness: Film type from 0.08 mm; foam type from 0.5 mm-3.0 mm
    • Use: Lightweight mounting, panel bonding, slitting, die-cutting, converting
    Read moreDone

  • Reusable Double Sided Adhesive Traceless Tape

    • Common Size: 30mm x 3m, 50mm x 5m, custom slit width
    • Color: Clear transparent gel
    • Material: PU gel or acrylic gel with PET release liner
    • Adhesive Type: Removable pressure-sensitive gel adhesive
    • Best Surfaces: Glass, ceramic tile, metal, acrylic, sealed plastic
    • Reuse Method: Rinse with clean water and air dry fully
    Read moreDone

  • Double Sided Fiberglass Mesh Tape

    • Carrier: Fiberglass mesh / scrim reinforced structure
    • Tape Type: Reinforced double sided adhesive tape
    • Adhesive: Hot melt, synthetic rubber, or acrylic PSA
    • Liner: Yellow glassine, white glassine, or kraft release liner
    • Thickness: Commonly 0.16-0.30 mm
    • Use: Carpet seams, flooring backing, foam, rubber mat, and material fixing
    Read moreDone

  • Transparent Acrylic Very Hi Bond Adhesive Tape

    • Common widths: 1/4 in, 7/16 in, 1/2 in, custom narrow slitting
    • Common thickness: 0.020 in and 0.040 in for shower seal bonding
    • Color: Transparent, low-visibility bond line on glass
    • Material: Clear acrylic high-bond pressure-sensitive adhesive
    • Liner: Blue film liner or release paper options
    • Use focus: Shower wipes, clear seals, and glass hardware assembly
    Read moreDone