No products were found matching your selection.
Other Related Products
-


- Thickness: 1 mm to 12 mm typical
- Width: 5 mm to 100 mm slit rolls
- Material: foam, rubber, EPDM, neoprene, silicone options
- Adhesive: single-sided adhesive backing
- Liner: paper or film release liner
- Format: rolls, cut strips, adhesive backed gasket strips
-


- Width: 5 mm, 6 mm, 8 mm, 10 mm, 12 mm
- Color: clear, translucent, white, black, or blue thermal grade
- Carrier: PET film, thin foam, or thermal adhesive carrier
- Thickness: 0.05-0.2 mm PET grade, 0.3-0.8 mm foam or thermal grade
- Adhesive: heat-resistant acrylic PSA for LED strip lights
- Format: narrow slit rolls for back adhesive replacement
-


- Width Options: 10mm, 15mm, 20mm
- Roll Lengths: 5m, 10m, 50m
- Color: Transparent
- Material: Acrylic adhesive on PET film
- Liner: Removable silicone-coated paper
- Thickness: 0.12 – 0.18 mm
-


- Common widths: 1/4 in, 7/16 in, 1/2 in, custom narrow slitting
- Common thickness: 0.020 in and 0.040 in for shower seal bonding
- Color: Transparent, low-visibility bond line on glass
- Material: Clear acrylic high-bond pressure-sensitive adhesive
- Liner: Blue film liner or release paper options
- Use focus: Shower wipes, clear seals, and glass hardware assembly
-


- Material: Closed-cell EVA foam carrier
- Adhesive: Acrylic, rubber, or hot melt PSA on both sides
- Thickness: Commonly 0.5mm-12mm
- Color: White, black, grey, or custom color
- Liner: Paper, PE-coated paper, or PET film release liner
- Format: Jumbo roll, slit roll, sheet, kiss-cut, or die-cut part
-


- Common Size: 30mm x 3m, 50mm x 5m, custom slit width
- Color: Clear transparent gel
- Material: PU gel or acrylic gel with PET release liner
- Adhesive Type: Removable pressure-sensitive gel adhesive
- Best Surfaces: Glass, ceramic tile, metal, acrylic, sealed plastic
- Reuse Method: Rinse with clean water and air dry fully
-


- Common thickness: 0.5 mm, 0.8 mm, 1.0 mm, 1.5 mm, 2.0 mm, 3.0 mm
- Color options: Black, white, gray, or custom color
- Foam carrier: PU foam with double coated PSA
- Adhesive options: Acrylic PSA or rubber PSA
- Supply format: Master roll, slit roll, sheet, kiss-cut, die-cut part
- Main use: Roll converting, assembly bonding, cushioning, gap filling
-


- Material: Non-slip adhesive pu rug pads feature dual-sided stickers.
- Stickers Color: White and clear.
- Thickness: 1 mm, 2 mm.
- Shape Design: Customize, such as rectangle, T-shape, Triangle and so on.
- Feature: Provides a firm grip on rug corners.