No products were found matching your selection.
Other Related Products
-


- Common Size: 30mm x 3m, 50mm x 5m, custom slit width
- Color: Clear transparent gel
- Material: PU gel or acrylic gel with PET release liner
- Adhesive Type: Removable pressure-sensitive gel adhesive
- Best Surfaces: Glass, ceramic tile, metal, acrylic, sealed plastic
- Reuse Method: Rinse with clean water and air dry fully
-


- Width Options: 10mm, 15mm, 20mm
- Roll Lengths: 5m, 10m, 50m
- Color: Transparent
- Material: Acrylic adhesive on PET film
- Liner: Removable silicone-coated paper
- Thickness: 0.12 – 0.18 mm
-


- Common Size: 3 mm-1240 mm width, 50 m-3000 m length
- Color: Clear or translucent, with paper or film release liner
- Material: PET film carrier with acrylic adhesive on both sides
- Thickness Range: Typical 50 um-300 um total thickness
- Adhesive Type: Permanent acrylic adhesive, low VOC option available
- Applications:Plastic, metal, glass, nameplate, panel, and converted part bonding
-


- Material: PVC/NBR closed-cell foam
- Color: Black, custom available
- Thickness: 1 mm – 25 mm typical
- Width: Slit rolls or custom strips
- Adhesive: Acrylic, rubber, high-tack options
- Format: Rolls, pads, gaskets, sheets
-


- Common thickness: 0.5 mm, 0.8 mm, 1.0 mm, 1.5 mm, 2.0 mm, 3.0 mm
- Color options: Black, white, gray, or custom color
- Foam carrier: PU foam with double coated PSA
- Adhesive options: Acrylic PSA or rubber PSA
- Supply format: Master roll, slit roll, sheet, kiss-cut, die-cut part
- Main use: Roll converting, assembly bonding, cushioning, gap filling
-


- Common widths: 1/4 in, 7/16 in, 1/2 in, custom narrow slitting
- Common thickness: 0.020 in and 0.040 in for shower seal bonding
- Color: Transparent, low-visibility bond line on glass
- Material: Clear acrylic high-bond pressure-sensitive adhesive
- Liner: Blue film liner or release paper options
- Use focus: Shower wipes, clear seals, and glass hardware assembly
-


- – Common size: 1020 mm / 1050 mm / 1240 mm width, 100 m-300 m length
- – Thickness: 0.5 mm-3.0 mm typical range
- – Foam color: White, black, gray
- – Carrier: Closed-cell PE foam or EVA foam
- – Adhesive: Acrylic PSA or modified acrylic PSA
- – Use surface: Sealed wood, painted metal, PVC, ABS, PC, composite panels
-


- Common thickness: 0.8 mm, 1.0 mm, 1.5 mm, 2.0 mm, 3.0 mm
- Foam options: Closed-cell PE foam or PVC foam
- Color: Black, white, or customized color
- Adhesive: Double-sided acrylic pressure-sensitive adhesive
- Liner: Blue PE film, PP film, or paper release liner
- Roll format: Slit rolls, jumbo rolls, die-cut pieces, kiss-cut formats