No products were found matching your selection.

Other Related Products

  • Double Sided EVA Foam Tape

    • Material: Closed-cell EVA foam carrier
    • Adhesive: Acrylic, rubber, or hot melt PSA on both sides
    • Thickness: Commonly 0.5mm-12mm
    • Color: White, black, grey, or custom color
    • Liner: Paper, PE-coated paper, or PET film release liner
    • Format: Jumbo roll, slit roll, sheet, kiss-cut, or die-cut part
  • Solid Neoprene Rubber Strip

    • Material: Solid CR neoprene rubber with dense structure
    • Color: Black standard, other colors by project request
    • Hardness: 40, 50, 60, 70, 80 Shore A, typical tolerance +/-5
    • Thickness: 0.5 mm-30 mm, with strip tolerance control
    • Format: Rolls, sheets, slit strips, cut lengths, die-cut parts
    • Options: Plain, PSA-backed, single-side adhesive, linered strips
  • Double Sided Polyurethane Foam Tapes

    • Common thickness: 0.5 mm, 0.8 mm, 1.0 mm, 1.5 mm, 2.0 mm, 3.0 mm
    • Color options: Black, white, gray, or custom color
    • Foam carrier: PU foam with double coated PSA
    • Adhesive options: Acrylic PSA or rubber PSA
    • Supply format: Master roll, slit roll, sheet, kiss-cut, die-cut part
    • Main use: Roll converting, assembly bonding, cushioning, gap filling
  • Reusable Double Sided Adhesive Traceless Tape

    • Common Size: 30mm x 3m, 50mm x 5m, custom slit width
    • Color: Clear transparent gel
    • Material: PU gel or acrylic gel with PET release liner
    • Adhesive Type: Removable pressure-sensitive gel adhesive
    • Best Surfaces: Glass, ceramic tile, metal, acrylic, sealed plastic
    • Reuse Method: Rinse with clean water and air dry fully
  • EPDM Foam Shore Hardness and Test Method

    EPDM foam shore hardness describes resistance to local indentation, but the result is useful only when Shore scale, specimen thickness, conditioning, and reading method are identified. This reference applies to closed-cell EPDM foam and adhesive-backed EPDM foam used in sealing constructions. Read hardness with density, compression deflection, compression set, and finished-tape checks. Reference data support comparison; final acceptance should be confirmed on the actual grade and representative samples.

  • Closed Cell EPDM Foam Tape

    • Material:Closed-cell EPDM rubber foam for compression sealing
    • Color:Black, with custom color options by request
    • Thickness:Typical 1 mm-25 mm, selected by real gap size
    • Density:Typical 80-180 kg/m3 for soft to medium sealing pressure
    • Adhesive:Single-sided acrylic PSA, rubber PSA, or non-adhesive format
    • Converting:Slit rolls, strips, kiss-cut parts, or die-cut pads
  • Double Sided Polyethylene Tape

    • Common size: 5 mm-1240 mm slit width, 25 m-100 m roll length
    • Color: Clear, white, black, or natural PE carrier options
    • Carrier: Polyethylene film carrier or polyethylene foam carrier
    • Adhesive: Acrylic, rubber, or synthetic rubber PSA on both sides
    • Thickness: Film type from 0.08 mm; foam type from 0.5 mm-3.0 mm
    • Use: Lightweight mounting, panel bonding, slitting, die-cutting, converting
  • Electronic Adhesive Tape Solutions for Displays, PCBs and LED Components

    Double sided tape for electronics must do more than stick during assembly. In display frames, PCB-adjacent components and LED modules, the bond may be narrow, exposed to heat, loaded in peel or shear, compressed inside a housing, or expected to survive handling before the adhesive has fully built strength. This solution explains how to match tape construction to the actual substrate, bond-line geometry, service temperature, cushioning need and removal requirement. It also shows when sample testing should move from a simple coupon to an actual-part trial, and which warning signs—edge lift, creep, adhesive squeeze-out, residue or component shift—should be checked before full production use.

  • Double Sided Tape Temperature Range & Thermal Performance Data

    The double sided tape temperature range includes separate application, continuous-service and short-term limits, not one universal maximum. This reference covers film-, tissue- and foam-carrier pressure-sensitive tapes where temperature, load and substrate movement affect the bond. Use it to define test conditions, then confirm peel, shear, edge condition and removal observations on the actual surface before full use.