No products were found matching your selection.
Other Related Products
-


- Material: PVC/NBR closed-cell foam
- Color: Black, custom available
- Thickness: 1 mm – 25 mm typical
- Width: Slit rolls or custom strips
- Adhesive: Acrylic, rubber, high-tack options
- Format: Rolls, pads, gaskets, sheets
-


- – Common size: 1020 mm / 1050 mm / 1240 mm width, 100 m-300 m length
- – Thickness: 0.5 mm-3.0 mm typical range
- – Foam color: White, black, gray
- – Carrier: Closed-cell PE foam or EVA foam
- – Adhesive: Acrylic PSA or modified acrylic PSA
- – Use surface: Sealed wood, painted metal, PVC, ABS, PC, composite panels
-

EPDM foam shore hardness describes resistance to local indentation, but the result is useful only when Shore scale, specimen thickness, conditioning, and reading method are identified. This reference applies to closed-cell EPDM foam and adhesive-backed EPDM foam used in sealing constructions. Read hardness with density, compression deflection, compression set, and finished-tape checks. Reference data support comparison; final acceptance should be confirmed on the actual grade and representative samples.
-


- Material: Solid CR neoprene rubber with dense structure
- Color: Black standard, other colors by project request
- Hardness: 40, 50, 60, 70, 80 Shore A, typical tolerance +/-5
- Thickness: 0.5 mm-30 mm, with strip tolerance control
- Format: Rolls, sheets, slit strips, cut lengths, die-cut parts
- Options: Plain, PSA-backed, single-side adhesive, linered strips
-


- Common Size: 30mm x 3m, 50mm x 5m, custom slit width
- Color: Clear transparent gel
- Material: PU gel or acrylic gel with PET release liner
- Adhesive Type: Removable pressure-sensitive gel adhesive
- Best Surfaces: Glass, ceramic tile, metal, acrylic, sealed plastic
- Reuse Method: Rinse with clean water and air dry fully
-


- Common Size: 3 mm-1240 mm width, 50 m-3000 m length
- Color: Clear or translucent, with paper or film release liner
- Material: PET film carrier with acrylic adhesive on both sides
- Thickness Range: Typical 50 um-300 um total thickness
- Adhesive Type: Permanent acrylic adhesive, low VOC option available
- Applications:Plastic, metal, glass, nameplate, panel, and converted part bonding
-


- Width Options: 10mm, 15mm, 20mm
- Roll Lengths: 5m, 10m, 50m
- Color: Transparent
- Material: Acrylic adhesive on PET film
- Liner: Removable silicone-coated paper
- Thickness: 0.12 – 0.18 mm
-


- Material: Closed-cell EVA foam carrier
- Adhesive: Acrylic, rubber, or hot melt PSA on both sides
- Thickness: Commonly 0.5mm-12mm
- Color: White, black, grey, or custom color
- Liner: Paper, PE-coated paper, or PET film release liner
- Format: Jumbo roll, slit roll, sheet, kiss-cut, or die-cut part