No products were found matching your selection.
Other Related Products
-


- Adhesion: Coated high-tack acrylic adhesive on both surfaces.
- Popular Size: 6 mm wide X 33 m long X 1 mm thick.
- Color: Transparent Very Hi-Bond Tape with Red Backing.
- Usage: Applied during shower enclosure fabrication. Ideal for attaching seals and wipes to your shower setup.
-


- Carrier: High-density closed-cell NBR foam.
- Adhesive: Coated with a solvent based acrylic adhesive.
- Thickness:3, 6, 9 and 12 mm.
- Width: 12 mm – 1000 mm.
- Length: 5 m, 9 m, 10 m & 15 m.
-


-
Adhesive: Available in water-based acrylic, hot-melt rubber, and solvent acrylic types.
-
Carrier: Flexible tissue, rigid PET, and soft nonwoven options offered.
-
Temperature: Functional within –10°C to +160°C range.
-
Liner: Choose from glassine paper, PE-coated kraft, or logo-printed PET liners.
-
Size: Roll sizes up to 1240 mm wide and 3000 m long.
-
Thickness: Varies from 0.08 mm to 0.14 mm based on configuration.
-


- Size: 108 feet length, 0.39 inch width, 0.03 inch thickness.
- Material: Consists of acrylic foam with PE film.
- Feature: It is great for packaging, sealing, and repairs. It’s waterproof, heat-resistant, and leaves no residue.
- Usage: For LED strip installation and a variety of industrial and DIY applications.
-


- Material: Composed of strong kraft paper bonded with hot melt adhesive and fiber reinforcement.
- Size Details: Measure about 4 inches x 66 ft / 6 inches x 15 ft.
- Type: No iron needed or Iron heating.
- Feature: 11 lines of high-strength adhesive.
-


- Material: Made of Open cell urethane foam with acrylic adhesive.
- Release liner Color: Green, White, Yellow.
- Width: 13 mm, 19 mm, 25 mm, 51 mm or custom.
- Length: 10 m, 33 m.
- Thickness: 0.8 mm, 1.6 mm, 3.2 mm.
-


- Material: It is constructed with high-density polyethylene foam coated with strong acrylic adhesive on both sides.
- Thickness: 0.4mm to 3mm.
- Width Choice: 10 mm, 12 mmand 19 mm.
- Length Per Roll: 5 m, 10 mand 33 m.
- Feature: Strong adhesion, shock-proof, waterproof, and air-proof.
-


- Thickness: 0.006 – 0.06 mm is for small parts; 0.1–0.4 mm suits electronics and printing plate mounting.
- Material: Acrylic adhesive layer with thin PET backing.
- Color Backing: Red, Yellow or White.
- Standard Roll: 50 meter.
- Width Range: 9 mm, 12 mm, 19 mm, 25 mm, 38 mm or customize.