No products were found matching your selection.
Other Related Products
-
- Material: Solid CR neoprene rubber with dense structure
- Color: Black standard, other colors by project request
- Hardness: 40, 50, 60, 70, 80 Shore A, typical tolerance +/-5
- Thickness: 0.5 mm-30 mm, with strip tolerance control
- Format: Rolls, sheets, slit strips, cut lengths, die-cut parts
- Options: Plain, PSA-backed, single-side adhesive, linered strips
-
Double sided tape for electronics must do more than stick during assembly. In display frames, PCB-adjacent components and LED modules, the bond may be narrow, exposed to heat, loaded in peel or shear, compressed inside a housing, or expected to survive handling before the adhesive has fully built strength. This solution explains how to match tape construction to the actual substrate, bond-line geometry, service temperature, cushioning need and removal requirement. It also shows when sample testing should move from a simple coupon to an actual-part trial, and which warning signs—edge lift, creep, adhesive squeeze-out, residue or component shift—should be checked before full production use.
-
- Material: Closed-cell EVA foam carrier
- Adhesive: Acrylic, rubber, or hot melt PSA on both sides
- Thickness: Commonly 0.5mm-12mm
- Color: White, black, grey, or custom color
- Liner: Paper, PE-coated paper, or PET film release liner
- Format: Jumbo roll, slit roll, sheet, kiss-cut, or die-cut part
-
- – Common size: 1020 mm / 1050 mm / 1240 mm width, 100 m-300 m length
- – Thickness: 0.5 mm-3.0 mm typical range
- – Foam color: White, black, gray
- – Carrier: Closed-cell PE foam or EVA foam
- – Adhesive: Acrylic PSA or modified acrylic PSA
- – Use surface: Sealed wood, painted metal, PVC, ABS, PC, composite panels
-
- Width: 5 mm, 6 mm, 8 mm, 10 mm, 12 mm
- Color: clear, translucent, white, black, or blue thermal grade
- Carrier: PET film, thin foam, or thermal adhesive carrier
- Thickness: 0.05-0.2 mm PET grade, 0.3-0.8 mm foam or thermal grade
- Adhesive: heat-resistant acrylic PSA for LED strip lights
- Format: narrow slit rolls for back adhesive replacement
-
EPDM foam shore hardness describes resistance to local indentation, but the result is useful only when Shore scale, specimen thickness, conditioning, and reading method are identified. This reference applies to closed-cell EPDM foam and adhesive-backed EPDM foam used in sealing constructions. Read hardness with density, compression deflection, compression set, and finished-tape checks. Reference data support comparison; final acceptance should be confirmed on the actual grade and representative samples.
-
- Common size: 0.5 mm-6 mm thickness, slit rolls or die-cut pads
- Color: Black, white, grey, or project-based color
- Foam material: PE, EVA, PU, or medium/high-density foam
- Adhesive: Single sided or double sided pressure-sensitive adhesive
- Liner: PET film, glassine paper, or PE-coated release liner
- Use: Equipment panels, enclosures, anti-rattle points, transport cushioning
-
The double sided tape temperature range includes separate application, continuous-service and short-term limits, not one universal maximum. This reference covers film-, tissue- and foam-carrier pressure-sensitive tapes where temperature, load and substrate movement affect the bond. Use it to define test conditions, then confirm peel, shear, edge condition and removal observations on the actual surface before full use.
-
- Width: 1020mm / 1240mm usable coating width
- Length: 1000m / 3000m roll length options
- Adhesive: hot melt, water-based acrylic, solvent acrylic
- Carrier: PET film, tissue, foam, cloth, transfer adhesive
- Liner: glassine paper, kraft paper, PET/PE/PP film
- Control points: +/-0.5mm slitting tolerance and clean roll edge
