No products were found matching your selection.

Other Related Products

  • Double Sided Polyethylene Tape

    • Common size: 5 mm-1240 mm slit width, 25 m-100 m roll length
    • Color: Clear, white, black, or natural PE carrier options
    • Carrier: Polyethylene film carrier or polyethylene foam carrier
    • Adhesive: Acrylic, rubber, or synthetic rubber PSA on both sides
    • Thickness: Film type from 0.08 mm; foam type from 0.5 mm-3.0 mm
    • Use: Lightweight mounting, panel bonding, slitting, die-cutting, converting
    Read moreDone

  • Closed Cell EPDM Foam Tape

    • Material:Closed-cell EPDM rubber foam for compression sealing
    • Color:Black, with custom color options by request
    • Thickness:Typical 1 mm-25 mm, selected by real gap size
    • Density:Typical 80-180 kg/m3 for soft to medium sealing pressure
    • Adhesive:Single-sided acrylic PSA, rubber PSA, or non-adhesive format
    • Converting:Slit rolls, strips, kiss-cut parts, or die-cut pads
    Read moreDone

  • Double Sided EVA Foam Tape

    • Material: Closed-cell EVA foam carrier
    • Adhesive: Acrylic, rubber, or hot melt PSA on both sides
    • Thickness: Commonly 0.5mm-12mm
    • Color: White, black, grey, or custom color
    • Liner: Paper, PE-coated paper, or PET film release liner
    • Format: Jumbo roll, slit roll, sheet, kiss-cut, or die-cut part
    Read moreDone

  • LED Strip Mounting Tape

    • Width: 5 mm, 6 mm, 8 mm, 10 mm, 12 mm
    • Color: clear, translucent, white, black, or blue thermal grade
    • Carrier: PET film, thin foam, or thermal adhesive carrier
    • Thickness: 0.05-0.2 mm PET grade, 0.3-0.8 mm foam or thermal grade
    • Adhesive: heat-resistant acrylic PSA for LED strip lights
    • Format: narrow slit rolls for back adhesive replacement
    Read moreDone

  • Solid Neoprene Rubber Strip

    • Material: Solid CR neoprene rubber with dense structure
    • Color: Black standard, other colors by project request
    • Hardness: 40, 50, 60, 70, 80 Shore A, typical tolerance +/-5
    • Thickness: 0.5 mm-30 mm, with strip tolerance control
    • Format: Rolls, sheets, slit strips, cut lengths, die-cut parts
    • Options: Plain, PSA-backed, single-side adhesive, linered strips
    Read moreDone

  • Double Sided Tape Jumbo Roll

    • Width: 1020mm / 1240mm usable coating width
    • Length: 1000m / 3000m roll length options
    • Adhesive: hot melt, water-based acrylic, solvent acrylic
    • Carrier: PET film, tissue, foam, cloth, transfer adhesive
    • Liner: glassine paper, kraft paper, PET/PE/PP film
    • Control points: +/-0.5mm slitting tolerance and clean roll edge
    Read moreDone

  • Adhesive Backed Gasket Tape

    • Thickness: 1 mm to 12 mm typical
    • Width: 5 mm to 100 mm slit rolls
    • Material: foam, rubber, EPDM, neoprene, silicone options
    • Adhesive: single-sided adhesive backing
    • Liner: paper or film release liner
    • Format: rolls, cut strips, adhesive backed gasket strips
    Read moreDone

  • Jumbo Roll Double Sided Foam Mounting Tape

    • – Common size: 1020 mm / 1050 mm / 1240 mm width, 100 m-300 m length
    • – Thickness: 0.5 mm-3.0 mm typical range
    • – Foam color: White, black, gray
    • – Carrier: Closed-cell PE foam or EVA foam
    • – Adhesive: Acrylic PSA or modified acrylic PSA
    • – Use surface: Sealed wood, painted metal, PVC, ABS, PC, composite panels
    Read moreDone

  • EPDM Foam Shore Hardness and Test Method

    EPDM foam shore hardness describes resistance to local indentation, but the result is useful only when Shore scale, specimen thickness, conditioning, and reading method are identified. This reference applies to closed-cell EPDM foam and adhesive-backed EPDM foam used in sealing constructions. Read hardness with density, compression deflection, compression set, and finished-tape checks. Reference data support comparison; final acceptance should be confirmed on the actual grade and representative samples.

    Read moreDone