No products were found matching your selection.

Other Related Products

  • Vinyl Nitrile Foam Tape

    • Material: PVC/NBR closed-cell foam
    • Color: Black, custom available
    • Thickness: 1 mm – 25 mm typical
    • Width: Slit rolls or custom strips
    • Adhesive: Acrylic, rubber, high-tack options
    • Format: Rolls, pads, gaskets, sheets
    Read moreDone

  • LED Strip Mounting Tape

    • Width: 5 mm, 6 mm, 8 mm, 10 mm, 12 mm
    • Color: clear, translucent, white, black, or blue thermal grade
    • Carrier: PET film, thin foam, or thermal adhesive carrier
    • Thickness: 0.05-0.2 mm PET grade, 0.3-0.8 mm foam or thermal grade
    • Adhesive: heat-resistant acrylic PSA for LED strip lights
    • Format: narrow slit rolls for back adhesive replacement
    Read moreDone

  • PET Double Sided Acrylic Tape

    • Common Size: 3 mm-1240 mm width, 50 m-3000 m length
    • Color: Clear or translucent, with paper or film release liner
    • Material: PET film carrier with acrylic adhesive on both sides
    • Thickness Range: Typical 50 um-300 um total thickness
    • Adhesive Type: Permanent acrylic adhesive, low VOC option available
    • Applications:Plastic, metal, glass, nameplate, panel, and converted part bonding
    Read moreDone

  • Jumbo Roll Double Sided Foam Mounting Tape

    • – Common size: 1020 mm / 1050 mm / 1240 mm width, 100 m-300 m length
    • – Thickness: 0.5 mm-3.0 mm typical range
    • – Foam color: White, black, gray
    • – Carrier: Closed-cell PE foam or EVA foam
    • – Adhesive: Acrylic PSA or modified acrylic PSA
    • – Use surface: Sealed wood, painted metal, PVC, ABS, PC, composite panels
    Read moreDone

  • Transparent Acrylic Very Hi Bond Adhesive Tape

    • Common widths: 1/4 in, 7/16 in, 1/2 in, custom narrow slitting
    • Common thickness: 0.020 in and 0.040 in for shower seal bonding
    • Color: Transparent, low-visibility bond line on glass
    • Material: Clear acrylic high-bond pressure-sensitive adhesive
    • Liner: Blue film liner or release paper options
    • Use focus: Shower wipes, clear seals, and glass hardware assembly
    Read moreDone

  • Double Sided Adhesive Paper Roll

    • Supply format: jumbo roll, log roll, slit roll, or die-cut sheet
    • Common liner: white release paper or yellow glassine release paper
    • Carrier: lightweight tissue paper or adhesive paper carrier
    • Adhesive: acrylic, hot melt, or rubber-based pressure-sensitive adhesive
    • Typical thickness: 80-160 um, depending on adhesive coat and liner
    • Roll options: custom width, length, core size, and winding tension
    Read moreDone

  • Rug Corner Pads

    • Material: Non-slip adhesive pu rug pads feature dual-sided stickers.
    • Stickers Color: White and clear.
    • Thickness: 1 mm, 2 mm.
    • Shape Design: Customize, such as rectangle, T-shape, Triangle and so on.
    • Feature: Provides a firm grip on rug corners.
    Read moreDone

  • Hot Melt Carpet Seaming Tape

    • Width: 90 mm, 100 mm, 150 mm
    • Length: 20 m, 25 m, 50 m, 100 m
    • Carrier: Kraft paper or release paper
    • Reinforcement: Fiberglass yarn and scrim
    • Glue Layout: 9-line or 11-line
    • Color: Brown, white, gold, or custom
    Read moreDone

  • Electronic Adhesive Tape Solutions for Displays, PCBs and LED Components

    Double sided tape for electronics must do more than stick during assembly. In display frames, PCB-adjacent components and LED modules, the bond may be narrow, exposed to heat, loaded in peel or shear, compressed inside a housing, or expected to survive handling before the adhesive has fully built strength. This solution explains how to match tape construction to the actual substrate, bond-line geometry, service temperature, cushioning need and removal requirement. It also shows when sample testing should move from a simple coupon to an actual-part trial, and which warning signs—edge lift, creep, adhesive squeeze-out, residue or component shift—should be checked before full production use.

    Read moreDone