No products were found matching your selection.
Other Related Products
-


- Material: Silicone sponge or silicone rubber
- Color: Black, grey, red, or custom
- Width: 10 mm to 100 mm
- Thickness: 2 mm to 15 mm
- Length: Roll or cut length
- Backing: Self adhesive liner
-


- Material: Cellular PVC foam carrier coated pressure sensitive adhesive on both sides.
- Width Options: 10 mm, 12 mm, 15 mm.
- Length Options: 10 m, 12 m, 15 m, 20 m, 25 m, 50 m.
- Thickness: 1 mm, 2 mm, 3 mm, 4 mm, 5 mm, 6 mm.
- Paper release liner color: Blue.
-


- Width: 5 mm, 6 mm, 8 mm, 10 mm, 12 mm
- Color: clear, translucent, white, black, or blue thermal grade
- Carrier: PET film, thin foam, or thermal adhesive carrier
- Thickness: 0.05-0.2 mm PET grade, 0.3-0.8 mm foam or thermal grade
- Adhesive: heat-resistant acrylic PSA for LED strip lights
- Format: narrow slit rolls for back adhesive replacement
-


- Material: PE foamed substrate coated with hot melt glue on both sides.
- Color: White PE foam and Black PE foam.
- Regular Size: 1050 mm (1030 mm) x 300 m x 1 mm.
- Applicable temperature: -20℃to 120℃.
-


- Material: Solid CR neoprene rubber with dense structure
- Color: Black standard, other colors by project request
- Hardness: 40, 50, 60, 70, 80 Shore A, typical tolerance +/-5
- Thickness: 0.5 mm-30 mm, with strip tolerance control
- Format: Rolls, sheets, slit strips, cut lengths, die-cut parts
- Options: Plain, PSA-backed, single-side adhesive, linered strips
-


- Design: Double-sided adhesive.
- Color: Transparent &Clear Tape.
- Feature:Keeps your clothes in place and prevents them from opening by accident.
- Large Size: About 8.5 x 1.8 x 0.01 cm, 7.6 x 1.7 x 0.01 cm.
- Small Size: About 8.5 x 1.2 x 0.01 cm.
-


- Common Size: 30mm x 3m, 50mm x 5m, custom slit width
- Color: Clear transparent gel
- Material: PU gel or acrylic gel with PET release liner
- Adhesive Type: Removable pressure-sensitive gel adhesive
- Best Surfaces: Glass, ceramic tile, metal, acrylic, sealed plastic
- Reuse Method: Rinse with clean water and air dry fully
-


- Material: Closed-cell EVA foam carrier
- Adhesive: Acrylic, rubber, or hot melt PSA on both sides
- Thickness: Commonly 0.5mm-12mm
- Color: White, black, grey, or custom color
- Liner: Paper, PE-coated paper, or PET film release liner
- Format: Jumbo roll, slit roll, sheet, kiss-cut, or die-cut part
-


- Common size: 0.5 mm-6 mm thickness, slit rolls or die-cut pads
- Color: Black, white, grey, or project-based color
- Foam material: PE, EVA, PU, or medium/high-density foam
- Adhesive: Single sided or double sided pressure-sensitive adhesive
- Liner: PET film, glassine paper, or PE-coated release liner
- Use: Equipment panels, enclosures, anti-rattle points, transport cushioning