No products were found matching your selection.
Other Related Products
-
Double sided tape for electronics must do more than stick during assembly. In display frames, PCB-adjacent components and LED modules, the bond may be narrow, exposed to heat, loaded in peel or shear, compressed inside a housing, or expected to survive handling before the adhesive has fully built strength. This solution explains how to match tape construction to the actual substrate, bond-line geometry, service temperature, cushioning need and removal requirement. It also shows when sample testing should move from a simple coupon to an actual-part trial, and which warning signs—edge lift, creep, adhesive squeeze-out, residue or component shift—should be checked before full production use.
-
- Thickness: 1 mm to 12 mm typical
- Width: 5 mm to 100 mm slit rolls
- Material: foam, rubber, EPDM, neoprene, silicone options
- Adhesive: single-sided adhesive backing
- Liner: paper or film release liner
- Format: rolls, cut strips, adhesive backed gasket strips
-
- Material: Closed-cell EVA foam carrier
- Adhesive: Acrylic, rubber, or hot melt PSA on both sides
- Thickness: Commonly 0.5mm-12mm
- Color: White, black, grey, or custom color
- Liner: Paper, PE-coated paper, or PET film release liner
- Format: Jumbo roll, slit roll, sheet, kiss-cut, or die-cut part
-
- – Common size: 1020 mm / 1050 mm / 1240 mm width, 100 m-300 m length
- – Thickness: 0.5 mm-3.0 mm typical range
- – Foam color: White, black, gray
- – Carrier: Closed-cell PE foam or EVA foam
- – Adhesive: Acrylic PSA or modified acrylic PSA
- – Use surface: Sealed wood, painted metal, PVC, ABS, PC, composite panels
-
- Width: 90 mm, 100 mm, 150 mm
- Length: 20 m, 25 m, 50 m, 100 m
- Carrier: Kraft paper or release paper
- Reinforcement: Fiberglass yarn and scrim
- Glue Layout: 9-line or 11-line
- Color: Brown, white, gold, or custom
-
- Material:Closed-cell EPDM rubber foam for compression sealing
- Color:Black, with custom color options by request
- Thickness:Typical 1 mm-25 mm, selected by real gap size
- Density:Typical 80-180 kg/m3 for soft to medium sealing pressure
- Adhesive:Single-sided acrylic PSA, rubber PSA, or non-adhesive format
- Converting:Slit rolls, strips, kiss-cut parts, or die-cut pads
-
EPDM foam shore hardness describes resistance to local indentation, but the result is useful only when Shore scale, specimen thickness, conditioning, and reading method are identified. This reference applies to closed-cell EPDM foam and adhesive-backed EPDM foam used in sealing constructions. Read hardness with density, compression deflection, compression set, and finished-tape checks. Reference data support comparison; final acceptance should be confirmed on the actual grade and representative samples.
-
The double sided tape temperature range includes separate application, continuous-service and short-term limits, not one universal maximum. This reference covers film-, tissue- and foam-carrier pressure-sensitive tapes where temperature, load and substrate movement affect the bond. Use it to define test conditions, then confirm peel, shear, edge condition and removal observations on the actual surface before full use.
