No products were found matching your selection.
Other Related Products
-
- Common Size: 30mm x 3m, 50mm x 5m, custom slit width
- Color: Clear transparent gel
- Material: PU gel or acrylic gel with PET release liner
- Adhesive Type: Removable pressure-sensitive gel adhesive
- Best Surfaces: Glass, ceramic tile, metal, acrylic, sealed plastic
- Reuse Method: Rinse with clean water and air dry fully
-
- Width Options: 10mm, 15mm, 20mm
- Roll Lengths: 5m, 10m, 50m
- Color: Transparent
- Material: Acrylic adhesive on PET film
- Liner: Removable silicone-coated paper
- Thickness: 0.12 – 0.18 mm
-
- Material: Closed-cell EVA foam carrier
- Adhesive: Acrylic, rubber, or hot melt PSA on both sides
- Thickness: Commonly 0.5mm-12mm
- Color: White, black, grey, or custom color
- Liner: Paper, PE-coated paper, or PET film release liner
- Format: Jumbo roll, slit roll, sheet, kiss-cut, or die-cut part
-
- Common size: 0.5 mm-6 mm thickness, slit rolls or die-cut pads
- Color: Black, white, grey, or project-based color
- Foam material: PE, EVA, PU, or medium/high-density foam
- Adhesive: Single sided or double sided pressure-sensitive adhesive
- Liner: PET film, glassine paper, or PE-coated release liner
- Use: Equipment panels, enclosures, anti-rattle points, transport cushioning
-
- Supply format: jumbo roll, log roll, slit roll, or die-cut sheet
- Common liner: white release paper or yellow glassine release paper
- Carrier: lightweight tissue paper or adhesive paper carrier
- Adhesive: acrylic, hot melt, or rubber-based pressure-sensitive adhesive
- Typical thickness: 80-160 um, depending on adhesive coat and liner
- Roll options: custom width, length, core size, and winding tension
-
- Width: 1020mm / 1240mm usable coating width
- Length: 1000m / 3000m roll length options
- Adhesive: hot melt, water-based acrylic, solvent acrylic
- Carrier: PET film, tissue, foam, cloth, transfer adhesive
- Liner: glassine paper, kraft paper, PET/PE/PP film
- Control points: +/-0.5mm slitting tolerance and clean roll edge
-
- Width: 5 mm, 6 mm, 8 mm, 10 mm, 12 mm
- Color: clear, translucent, white, black, or blue thermal grade
- Carrier: PET film, thin foam, or thermal adhesive carrier
- Thickness: 0.05-0.2 mm PET grade, 0.3-0.8 mm foam or thermal grade
- Adhesive: heat-resistant acrylic PSA for LED strip lights
- Format: narrow slit rolls for back adhesive replacement
-
- Material: Sponge or foamof PTFE, EPDM, Neoprene, Silicone, or Closed Cell PVC.
- Adhesive: High-performance acrylic or silicone adhesive.
- Application: To prevent dust, air, and weather intrusions.
- Size: 14 mmX 10 m X 5 mm.
- Color: White.
-
- Common size: 5 mm-1240 mm slit width, 25 m-100 m roll length
- Color: Clear, white, black, or natural PE carrier options
- Carrier: Polyethylene film carrier or polyethylene foam carrier
- Adhesive: Acrylic, rubber, or synthetic rubber PSA on both sides
- Thickness: Film type from 0.08 mm; foam type from 0.5 mm-3.0 mm
- Use: Lightweight mounting, panel bonding, slitting, die-cutting, converting
