No products were found matching your selection.
Other Related Products
-
- Material: Sponge or foamof PTFE, EPDM, Neoprene, Silicone, or Closed Cell PVC.
- Adhesive: High-performance acrylic or silicone adhesive.
- Application: To prevent dust, air, and weather intrusions.
- Size: 14 mmX 10 m X 5 mm.
- Color: White.
-
- Design: Double-sided adhesive.
- Color: Transparent &Clear Tape.
- Feature:Keeps your clothes in place and prevents them from opening by accident.
- Large Size: About 8.5 x 1.8 x 0.01 cm, 7.6 x 1.7 x 0.01 cm.
- Small Size: About 8.5 x 1.2 x 0.01 cm.
-
- Material: PVC/NBR closed-cell foam
- Color: Black, custom available
- Thickness: 1 mm – 25 mm typical
- Width: Slit rolls or custom strips
- Adhesive: Acrylic, rubber, high-tack options
- Format: Rolls, pads, gaskets, sheets
-
-
Adhesive: Includes solvent rubber, eco-friendly acrylic, and fast-grab rubber.
-
Carrier: Options include thin tissue, durable PET, and flexible non-woven.
-
Liner: White/yellow glassine, PE-coated paper, or PET with custom branding.
-
Width Range: From 5 mm to 30 mm.
-
Thickness: Thickness options from 60μm to 250μm.
- Standard Length: 10 m, 20 m, 50 m.
-
- Common size: 0.5 mm-6 mm thickness, slit rolls or die-cut pads
- Color: Black, white, grey, or project-based color
- Foam material: PE, EVA, PU, or medium/high-density foam
- Adhesive: Single sided or double sided pressure-sensitive adhesive
- Liner: PET film, glassine paper, or PE-coated release liner
- Use: Equipment panels, enclosures, anti-rattle points, transport cushioning
-
- Common widths: 1/4 in, 7/16 in, 1/2 in, custom narrow slitting
- Common thickness: 0.020 in and 0.040 in for shower seal bonding
- Color: Transparent, low-visibility bond line on glass
- Material: Clear acrylic high-bond pressure-sensitive adhesive
- Liner: Blue film liner or release paper options
- Use focus: Shower wipes, clear seals, and glass hardware assembly
-
- Common thickness: 0.5 mm, 0.8 mm, 1.0 mm, 1.5 mm, 2.0 mm, 3.0 mm
- Color options: Black, white, gray, or custom color
- Foam carrier: PU foam with double coated PSA
- Adhesive options: Acrylic PSA or rubber PSA
- Supply format: Master roll, slit roll, sheet, kiss-cut, die-cut part
- Main use: Roll converting, assembly bonding, cushioning, gap filling
-
- Material: Silicone sponge or silicone rubber
- Color: Black, grey, red, or custom
- Width: 10 mm to 100 mm
- Thickness: 2 mm to 15 mm
- Length: Roll or cut length
- Backing: Self adhesive liner
