No products were found matching your selection.
Other Related Products
-
- Common thickness: 0.5 mm, 0.8 mm, 1.0 mm, 1.5 mm, 2.0 mm, 3.0 mm
- Color options: Black, white, gray, or custom color
- Foam carrier: PU foam with double coated PSA
- Adhesive options: Acrylic PSA or rubber PSA
- Supply format: Master roll, slit roll, sheet, kiss-cut, die-cut part
- Main use: Roll converting, assembly bonding, cushioning, gap filling
-
- Design: Double-sided adhesive.
- Color: Transparent &Clear Tape.
- Feature:Keeps your clothes in place and prevents them from opening by accident.
- Large Size: About 8.5 x 1.8 x 0.01 cm, 7.6 x 1.7 x 0.01 cm.
- Small Size: About 8.5 x 1.2 x 0.01 cm.
-
- Material: Solid CR neoprene rubber with dense structure
- Color: Black standard, other colors by project request
- Hardness: 40, 50, 60, 70, 80 Shore A, typical tolerance +/-5
- Thickness: 0.5 mm-30 mm, with strip tolerance control
- Format: Rolls, sheets, slit strips, cut lengths, die-cut parts
- Options: Plain, PSA-backed, single-side adhesive, linered strips
-
- Material: Medium-density closed cell EPDM foam, black in color, featuring a smooth surface.
- Adhesive: Permanent acrylic pressure sensitive adhesive (PSA).
- Temperature range: from -20 ºC to 100 ºC.
- Size: 20 mm X 20 m per roll.
- Thickness: 2 mm, 3 mm, 4 mm and 5 mm.
-
- Common size: 5 mm-1240 mm slit width, 25 m-100 m roll length
- Color: Clear, white, black, or natural PE carrier options
- Carrier: Polyethylene film carrier or polyethylene foam carrier
- Adhesive: Acrylic, rubber, or synthetic rubber PSA on both sides
- Thickness: Film type from 0.08 mm; foam type from 0.5 mm-3.0 mm
- Use: Lightweight mounting, panel bonding, slitting, die-cutting, converting
-
- Material: PE foamed substrate coated with hot melt glue on both sides.
- Color: White PE foam and Black PE foam.
- Regular Size: 1050 mm (1030 mm) x 300 m x 1 mm.
- Applicable temperature: -20℃to 120℃.
-
- Common Size: 30mm x 3m, 50mm x 5m, custom slit width
- Color: Clear transparent gel
- Material: PU gel or acrylic gel with PET release liner
- Adhesive Type: Removable pressure-sensitive gel adhesive
- Best Surfaces: Glass, ceramic tile, metal, acrylic, sealed plastic
- Reuse Method: Rinse with clean water and air dry fully
-
- Width: 5 mm, 6 mm, 8 mm, 10 mm, 12 mm
- Color: clear, translucent, white, black, or blue thermal grade
- Carrier: PET film, thin foam, or thermal adhesive carrier
- Thickness: 0.05-0.2 mm PET grade, 0.3-0.8 mm foam or thermal grade
- Adhesive: heat-resistant acrylic PSA for LED strip lights
- Format: narrow slit rolls for back adhesive replacement
-
- Material: Silicone sponge or silicone rubber
- Color: Black, grey, red, or custom
- Width: 10 mm to 100 mm
- Thickness: 2 mm to 15 mm
- Length: Roll or cut length
- Backing: Self adhesive liner
