No products were found matching your selection.
Other Related Products
-
- Material:Closed-cell EPDM rubber foam for compression sealing
- Color:Black, with custom color options by request
- Thickness:Typical 1 mm-25 mm, selected by real gap size
- Density:Typical 80-180 kg/m3 for soft to medium sealing pressure
- Adhesive:Single-sided acrylic PSA, rubber PSA, or non-adhesive format
- Converting:Slit rolls, strips, kiss-cut parts, or die-cut pads
-
- Material: Silicone sponge or silicone rubber
- Color: Black, grey, red, or custom
- Width: 10 mm to 100 mm
- Thickness: 2 mm to 15 mm
- Length: Roll or cut length
- Backing: Self adhesive liner
-
- Material: PVC/NBR closed-cell foam
- Color: Black, custom available
- Thickness: 1 mm – 25 mm typical
- Width: Slit rolls or custom strips
- Adhesive: Acrylic, rubber, high-tack options
- Format: Rolls, pads, gaskets, sheets
-
- Width: 5 mm, 6 mm, 8 mm, 10 mm, 12 mm
- Color: clear, translucent, white, black, or blue thermal grade
- Carrier: PET film, thin foam, or thermal adhesive carrier
- Thickness: 0.05-0.2 mm PET grade, 0.3-0.8 mm foam or thermal grade
- Adhesive: heat-resistant acrylic PSA for LED strip lights
- Format: narrow slit rolls for back adhesive replacement
-
- Width: 90 mm, 100 mm, 150 mm
- Length: 20 m, 25 m, 50 m, 100 m
- Carrier: Kraft paper or release paper
- Reinforcement: Fiberglass yarn and scrim
- Glue Layout: 9-line or 11-line
- Color: Brown, white, gold, or custom
-
- Common thickness: 0.8 mm, 1.0 mm, 1.5 mm, 2.0 mm, 3.0 mm
- Foam options: Closed-cell PE foam or PVC foam
- Color: Black, white, or customized color
- Adhesive: Double-sided acrylic pressure-sensitive adhesive
- Liner: Blue PE film, PP film, or paper release liner
- Roll format: Slit rolls, jumbo rolls, die-cut pieces, kiss-cut formats
-
- Material: Closed-cell EVA foam carrier
- Adhesive: Acrylic, rubber, or hot melt PSA on both sides
- Thickness: Commonly 0.5mm-12mm
- Color: White, black, grey, or custom color
- Liner: Paper, PE-coated paper, or PET film release liner
- Format: Jumbo roll, slit roll, sheet, kiss-cut, or die-cut part
-
- Common size: 0.5 mm-6 mm thickness, slit rolls or die-cut pads
- Color: Black, white, grey, or project-based color
- Foam material: PE, EVA, PU, or medium/high-density foam
- Adhesive: Single sided or double sided pressure-sensitive adhesive
- Liner: PET film, glassine paper, or PE-coated release liner
- Use: Equipment panels, enclosures, anti-rattle points, transport cushioning
