No products were found matching your selection.
Other Related Products
-
- Material: Solid CR neoprene rubber with dense structure
- Color: Black standard, other colors by project request
- Hardness: 40, 50, 60, 70, 80 Shore A, typical tolerance +/-5
- Thickness: 0.5 mm-30 mm, with strip tolerance control
- Format: Rolls, sheets, slit strips, cut lengths, die-cut parts
- Options: Plain, PSA-backed, single-side adhesive, linered strips
-
- Supply format: jumbo roll, log roll, slit roll, or die-cut sheet
- Common liner: white release paper or yellow glassine release paper
- Carrier: lightweight tissue paper or adhesive paper carrier
- Adhesive: acrylic, hot melt, or rubber-based pressure-sensitive adhesive
- Typical thickness: 80-160 um, depending on adhesive coat and liner
- Roll options: custom width, length, core size, and winding tension
-
- Thickness: 1 mm to 12 mm typical
- Width: 5 mm to 100 mm slit rolls
- Material: foam, rubber, EPDM, neoprene, silicone options
- Adhesive: single-sided adhesive backing
- Liner: paper or film release liner
- Format: rolls, cut strips, adhesive backed gasket strips
-
- Material: PVC/NBR closed-cell foam
- Color: Black, custom available
- Thickness: 1 mm – 25 mm typical
- Width: Slit rolls or custom strips
- Adhesive: Acrylic, rubber, high-tack options
- Format: Rolls, pads, gaskets, sheets
-
- Width: 1020mm / 1240mm usable coating width
- Length: 1000m / 3000m roll length options
- Adhesive: hot melt, water-based acrylic, solvent acrylic
- Carrier: PET film, tissue, foam, cloth, transfer adhesive
- Liner: glassine paper, kraft paper, PET/PE/PP film
- Control points: +/-0.5mm slitting tolerance and clean roll edge
-
- Width: 90 mm, 100 mm, 150 mm
- Length: 20 m, 25 m, 50 m, 100 m
- Carrier: Kraft paper or release paper
- Reinforcement: Fiberglass yarn and scrim
- Glue Layout: 9-line or 11-line
- Color: Brown, white, gold, or custom
-
- Width: 5 mm, 6 mm, 8 mm, 10 mm, 12 mm
- Color: clear, translucent, white, black, or blue thermal grade
- Carrier: PET film, thin foam, or thermal adhesive carrier
- Thickness: 0.05-0.2 mm PET grade, 0.3-0.8 mm foam or thermal grade
- Adhesive: heat-resistant acrylic PSA for LED strip lights
- Format: narrow slit rolls for back adhesive replacement
-
- Common thickness: 0.8 mm, 1.0 mm, 1.5 mm, 2.0 mm, 3.0 mm
- Foam options: Closed-cell PE foam or PVC foam
- Color: Black, white, or customized color
- Adhesive: Double-sided acrylic pressure-sensitive adhesive
- Liner: Blue PE film, PP film, or paper release liner
- Roll format: Slit rolls, jumbo rolls, die-cut pieces, kiss-cut formats
