No products were found matching your selection.
Other Related Products
-
- Width: 1020mm / 1240mm usable coating width
- Length: 1000m / 3000m roll length options
- Adhesive: hot melt, water-based acrylic, solvent acrylic
- Carrier: PET film, tissue, foam, cloth, transfer adhesive
- Liner: glassine paper, kraft paper, PET/PE/PP film
- Control points: +/-0.5mm slitting tolerance and clean roll edge
-
- Common thickness: 0.8 mm, 1.0 mm, 1.5 mm, 2.0 mm, 3.0 mm
- Foam options: Closed-cell PE foam or PVC foam
- Color: Black, white, or customized color
- Adhesive: Double-sided acrylic pressure-sensitive adhesive
- Liner: Blue PE film, PP film, or paper release liner
- Roll format: Slit rolls, jumbo rolls, die-cut pieces, kiss-cut formats
-
- Width Options: 10mm, 15mm, 20mm
- Roll Lengths: 5m, 10m, 50m
- Color: Transparent
- Material: Acrylic adhesive on PET film
- Liner: Removable silicone-coated paper
- Thickness: 0.12 – 0.18 mm
-
- Common widths: 1/4 in, 7/16 in, 1/2 in, custom narrow slitting
- Common thickness: 0.020 in and 0.040 in for shower seal bonding
- Color: Transparent, low-visibility bond line on glass
- Material: Clear acrylic high-bond pressure-sensitive adhesive
- Liner: Blue film liner or release paper options
- Use focus: Shower wipes, clear seals, and glass hardware assembly
-
- Common thickness: 0.5 mm, 0.8 mm, 1.0 mm, 1.5 mm, 2.0 mm, 3.0 mm
- Color options: Black, white, gray, or custom color
- Foam carrier: PU foam with double coated PSA
- Adhesive options: Acrylic PSA or rubber PSA
- Supply format: Master roll, slit roll, sheet, kiss-cut, die-cut part
- Main use: Roll converting, assembly bonding, cushioning, gap filling
-
- Common size: 5 mm-1240 mm slit width, 25 m-100 m roll length
- Color: Clear, white, black, or natural PE carrier options
- Carrier: Polyethylene film carrier or polyethylene foam carrier
- Adhesive: Acrylic, rubber, or synthetic rubber PSA on both sides
- Thickness: Film type from 0.08 mm; foam type from 0.5 mm-3.0 mm
- Use: Lightweight mounting, panel bonding, slitting, die-cutting, converting
-
- Material: Solid CR neoprene rubber with dense structure
- Color: Black standard, other colors by project request
- Hardness: 40, 50, 60, 70, 80 Shore A, typical tolerance +/-5
- Thickness: 0.5 mm-30 mm, with strip tolerance control
- Format: Rolls, sheets, slit strips, cut lengths, die-cut parts
- Options: Plain, PSA-backed, single-side adhesive, linered strips
-
- Thickness: 1 mm to 12 mm typical
- Width: 5 mm to 100 mm slit rolls
- Material: foam, rubber, EPDM, neoprene, silicone options
- Adhesive: single-sided adhesive backing
- Liner: paper or film release liner
- Format: rolls, cut strips, adhesive backed gasket strips
