No products were found matching your selection.
Other Related Products
-


- Material: Silicone sponge or silicone rubber
- Color: Black, grey, red, or custom
- Width: 10 mm to 100 mm
- Thickness: 2 mm to 15 mm
- Length: Roll or cut length
- Backing: Self adhesive liner
-


- Material: Closed-cell EVA foam carrier
- Adhesive: Acrylic, rubber, or hot melt PSA on both sides
- Thickness: Commonly 0.5mm-12mm
- Color: White, black, grey, or custom color
- Liner: Paper, PE-coated paper, or PET film release liner
- Format: Jumbo roll, slit roll, sheet, kiss-cut, or die-cut part
-


- Common size: 0.5 mm-6 mm thickness, slit rolls or die-cut pads
- Color: Black, white, grey, or project-based color
- Foam material: PE, EVA, PU, or medium/high-density foam
- Adhesive: Single sided or double sided pressure-sensitive adhesive
- Liner: PET film, glassine paper, or PE-coated release liner
- Use: Equipment panels, enclosures, anti-rattle points, transport cushioning
-


- Material: PVC/NBR closed-cell foam
- Color: Black, custom available
- Thickness: 1 mm – 25 mm typical
- Width: Slit rolls or custom strips
- Adhesive: Acrylic, rubber, high-tack options
- Format: Rolls, pads, gaskets, sheets
-


- Common Size: 3 mm-1240 mm width, 50 m-3000 m length
- Color: Clear or translucent, with paper or film release liner
- Material: PET film carrier with acrylic adhesive on both sides
- Thickness Range: Typical 50 um-300 um total thickness
- Adhesive Type: Permanent acrylic adhesive, low VOC option available
- Applications:Plastic, metal, glass, nameplate, panel, and converted part bonding
-


- Width Options: 10mm, 15mm, 20mm
- Roll Lengths: 5m, 10m, 50m
- Color: Transparent
- Material: Acrylic adhesive on PET film
- Liner: Removable silicone-coated paper
- Thickness: 0.12 – 0.18 mm
-


- Thickness: 1 mm to 12 mm typical
- Width: 5 mm to 100 mm slit rolls
- Material: foam, rubber, EPDM, neoprene, silicone options
- Adhesive: single-sided adhesive backing
- Liner: paper or film release liner
- Format: rolls, cut strips, adhesive backed gasket strips
-


- Common widths: 1/4 in, 7/16 in, 1/2 in, custom narrow slitting
- Common thickness: 0.020 in and 0.040 in for shower seal bonding
- Color: Transparent, low-visibility bond line on glass
- Material: Clear acrylic high-bond pressure-sensitive adhesive
- Liner: Blue film liner or release paper options
- Use focus: Shower wipes, clear seals, and glass hardware assembly