Transparent Acrylic Very Hi Bond Adhesive Tape
- Common widths: 1/4 in, 7/16 in, 1/2 in, custom narrow slitting
- Common thickness: 0.020 in and 0.040 in for shower seal bonding
- Color: Transparent, low-visibility bond line on glass
- Material: Clear acrylic high-bond pressure-sensitive adhesive
- Liner: Blue film liner or release paper options
- Use focus: Shower wipes, clear seals, and glass hardware assembly
Transparent Acrylic Very Hi Bond Adhesive Tape is made by Double Sticky Tape Company, a manufacturer focused on clear acrylic high-bond adhesive tape for shower enclosure fabrication. It is used for attaching wipes and seals, bonding transparent edge profiles, and assembling selected glass hardware where the bond line should stay clean and discreet. With 0.020 in and 0.040 in thickness options, the tape performs best on prepared glass after careful liner removal, firm pressure, and proper dwell time in moisture-exposed shower areas.
Product Video
Product Photos
Product Overview
This transparent acrylic tape is designed for shower enclosure work where appearance and holding stability both matter. On frameless glass doors, side seals, bottom seals, and clear edge profiles, the adhesive line should not look dark, bulky, or uneven. Common narrow slit widths such as 1/4 in, 7/16 in, and 1/2 in help the tape sit neatly inside slim sealing profiles without showing beyond the edge.
The thickness should be selected according to the contact surface. A 0.020 in tape is often preferred when the seal profile needs a thin, low-profile bond. A 0.040 in version gives slightly more adhesive contact where the profile has a small gap or a less even contact face. Before bonding, glass should be dry and free from fingerprints, cutting oil, silicone mist, polishing residue, dust, and moisture. A compatible IPA and water wipe may be used on clean glass, followed by complete drying with a lint-free cloth. For clear PC, acrylic, coated profiles, or new seal materials, sample testing is recommended before volume assembly.
Benefits
- Clear acrylic high-bond adhesive helps keep the bond line low-visibility on glass and transparent sealing profiles.
- Narrow slit widths fit shower wipes, edge seals, and slim hardware contact areas without adhesive overhang.
- 020 in and 0.040 in thickness options support different seal heights, small gaps, and contact surface conditions.
- Moisture-resistant acrylic adhesive is suitable for shower enclosure use after correct cleaning, pressure, and dwell time.
- Controlled liner removal helps reduce dust pickup, finger contact, adhesive stretch, and narrow-strip distortion.
- Long-term holding improves after uniform pressure, with typical final bond development taking up to 72 hours.
How should glass surfaces and liners be handled before pressure bonding?
Good bonding starts before the tape touches the glass. The bonding area should be clean, dry, and free from cutting oil, polishing residue, fingerprints, silicone mist, dust, and moisture. The release liner should remain on the tape until the seal or hardware part is aligned and ready, because exposed adhesive can collect dust quickly. After the liner is removed, apply steady pressure along the full seal length so the adhesive can wet out against the glass. This simple step helps reduce edge lifting, weak spots, and early bond failure when the seal faces repeated water contact.
TDS
Item Typical Value
Product type Transparent Acrylic Very Hi Bond Adhesive Tape
Adhesive system Clear acrylic high-bond pressure-sensitive adhesive
Appearance Transparent / water-clear bond line
Standard thickness 0.020 in / 0.040 in
Common width 1/4 in, 7/16 in, 1/2 in, custom narrow slitting available
Release liner Blue film liner or release paper, depending on converting request
180-degree peel adhesion 18-28 N/25 mm after 72 h dwell, reference value
Shear holding power >24 h at 23 C with 1 kg load, reference value
Application temperature 15 C to 35 C recommended
Service temperature -20 C to 90 C continuous, 120 C short-term reference
Recommended dwell time 24 h for handling strength, up to 72 h for final bond development
Surface preparation Clean, dry glass surface, no oil, dust, silicone mist, or moisture
Moisture resistance Suitable for shower enclosure environments after correct bonding
Slitting tolerance +/-0.3 mm reference for narrow roll converting
Storage condition 20 C to 25 C, dry room, original packaging
Product Packaging
Product Production
Applications
- Attaching shower wipes to frameless glass doors
- Bonding clear side seals and bottom seals in shower enclosure fabrication
- Fixing transparent sealing profiles on narrow glass edges
- Supporting glass hardware assembly where a clean bond line is required
- Bonding glass, clear PC, or acrylic profiles after compatibility testing
- Shower door edge sealing where drilling or visible fasteners are not preferred
Where does transparent acrylic very hi-bond adhesive tape perform best in shower enclosure fabrication?
This tape works best where the contact area is narrow and the finished appearance still needs to look clean. It is especially suitable for attaching wipes and seals to frameless shower doors, fixing clear edge seals, and supporting small glass hardware parts with limited bonding surfaces. In wet shower environments, holding power depends on more than adhesive strength alone. Clean glass, correct liner removal, even pressure, and enough dwell time all help the bond stay stable before repeated water exposure or service load. Application within the recommended 15 C to 35 C range also helps the adhesive build a more reliable hold.
Loading Container
FAQ
-
Can this tape be used directly on wet glass?
No. The glass must be clean and dry before bonding. Moisture, oil, dust, silicone mist, or polishing residue can reduce adhesion.
-
Which thickness is better for shower seals?
0.020 in is suitable for low-profile seals. 0.040 in can help when the profile needs slightly more adhesive contact.
-
How long should the bond develop before use?
Initial handling strength starts after firm pressure, but final bond development typically needs up to 72 hours.
-
Can the tape be supplied in narrow custom widths?
Yes. Double Sticky Tape Company can slit narrow widths for shower wipes, clear seals, and glass hardware assembly.
